Insufficient Storage for VSS Error "0x8004231F or Error: VSSControl: -2147467259" - Safe Backup Plus

Insufficient Storage for VSS Error "0x8004231F or Error: VSSControl: -2147467259" - Safe Backup Plus

Challenge

The following error occurs during backup:
VSSControl: -2147467259 Backup job failed. Cannot create a shadow copy of the volumes containing writer's data. VSS asynchronous operation is not completed. Operation: [Shadow copies commit]. Code: [0x8004231f].

Cause

This error is usually caused by insufficient disk space on one volume in the Windows OS being backed up. This can include the System Reserved Partition.
 
It can also be caused by defining shadow storage associations with a maximum size smaller than necessary to create the shadow copy.
 


This issue may also occur if the volume is larger than the size which Microsoft VSS supports (64TB).

Operation: [Shadow copies commit]. Code: [0x80042306]

More information: https://support.microsoft.com/en-us/help/2967756/usability-limit-for-volume-shadow-copy-service-vss-in-windows

Solution

Verify Sufficient Free Space

Within the VM guest OS that cannot be backed up or replicated, use the Disk Management utility (diskmgmt.msc) to view free space on each NTFS volume:
User-added image

If a volume is low on disk space, the solution is to delete files, expand the volume, or redirect shadow copies to another volume. For virtual machines, the simplest solution is usually to increase the size of the VM’s hard disk, then expand the volume in Disk Management.

Although it is sometimes possible to create a shadow copy using less than 1% of the free space on a volume, 15%-20% free space is often required on busy volumes. The smallest amount of space that can be allocated is configurable, but Microsoft Support has recommended maintaining at least 42 MB free on the system reserved partition.

If it is not clear which volume has insufficient space, see “How to Check Which Volume is Causing the Error”, below.
 

(Optionally) Redirect Shadow Copies

It is possible to change the shadow storage association to use a volume with sufficient free space; The location can be changed from the Shadow Copies utility, or from the command line. To access the utility, right click any volume and choose Configure Shadow Copies.
Warning: This is not recommended in a Hyper-V environment.

Shadow Copies Utility (Server OS Only)

To access the utility, right click any volume and choose Configure Shadow Copies. On older server operating systems, this may instead be a tab in Properties.

  1. Select the volume with insufficient space;
  2. Click Settings…
  3. In the dropdown labeled Located on this volume, select a volume with sufficient space to store the shadow copies.

Volume Shadow Copy Service supports a volume size of up to 64 TB, larger volumes cannot be selected as storage area. Manual changes may cause software malfunction.

User-added image

Command Line (Client or Server OS)

All commands below should be run from an administrator command prompt.

Use vssadmin list shadowstorage to view existing shadow storage associations. If no shadow storage exists for any volume, the command response will be “No items found that satisfy the query.”

If no association is listed for the volume, run vssadmin add shadowstorage to change the location of the shadow storage area. For example, to redirect shadows from D: to E:

vssadmin add shadowstorage /for=D: /on=E: /maxsize=200GB

If a shadow storage association already exists, run vssadmin resize shadowstorage to change the size of the shadow storage area. For example, to redirect shadows from D: to E:

vssadmin resize shadowstorage /for=D: /on=E: /maxsize=200GB

The /maxsize parameter is not optional, but can be set as /maxsize=UNBOUNDED. Otherwise, a value of 15-20% of the source volume’s size is generally recommended for busy servers.

How to Check Which Volume is Causing the Error

In some cases, it may not be obvious which volume needs to be modified. To isolate the problem, perform the following steps within the VM guest OS that cannot be backed up or replicated.
Create and then delete a shadow copy of each volume, one at a time. To access the GUI, right click any volume and choose Configure Shadow Copies. On older operating systems, this may instead be a tab in Properties. In the Shadow Copies utility:

  1. Select a volume;
  2. Click Create Now;
  3. If this is successful, select the shadow copy and click Delete Now;
  4. Repeat steps 1-3 for each volume.

User-added image

If the affected volume has sufficient free disk space, the shadow storage limit may be too small. Redirect the shadow copies as shown above, or increase the shadow storage limit.


    • Related Articles

    • Troubleshooting VSS errors – SAFE Backup PLUS

      Disclaimer: VSS is an OS component, the steps mentioned below should only be performed by your system admin and/or after consulting Microsoft. We cannot take responsibility for faults caused by following the below steps. VSS error codes and their ...

    • What is SAFE Backup PLUS

      SAFE Backup PLUS is an updated and improved version of our Safe Backup service but stripped back to maximize performance on the features that you need most from a backup product Have a look at what SAFE Backup PLUS can give you Deduplication Built in ...

    • Basic Troubleshooting Guide for VSS – SAFE Backup PLUS

      Disclaimer: VSS is an OS component, the steps mentioned below should only be performed by your system admin and/or after consulting Microsoft. We cannot take responsibility for faults caused by following the below steps. This article provides the ...

    • Create a local storage vault – SAFE Backup PLUS

      Click on the ellipses top right and select “Settings”. On the “Storage Vaults” tab select the blue “+”. In the window that opens select “Custom” and press “ok” when ready. In the window that opens you will be able to name your vault and set the ...

    • Resetting your password – SAFE Backup PLUS

      You can reset your password from the SAFE Backup PLUS client, but you will need to enter your current password to do this. If you have forgotten your password please call us. Login to the client, select “Settings” to the left, then “Account” to the ...